Introducing the Micro T-Connector
Split Septum Micro T-Connector with Unique Split Septum Design providing 3-Levels of Microbial Barrier Protection
Validated for use with the Hummi Micro Draw Blood Transfer Device
- A smooth, easy to disinfect septum promotes a safe and effective microbial barrier
- Split Septum design provides Microbial Barrier Protection at all times
- Designed for easy insertion with the Hummi (<1 foot pound insertion force) 1
- Tested to 150 septum insertions with the Hummi Micro Draw Device 1
- Pressure Tested to 20 psi/1hr without leak 1
- Tested to -10 psi vacuum with Hummi Micro Draw in place 1
- Microbore tubing with secure luer locking collar
- Materials are DEHP and Latex Free 1
- Low internal volume 0.25mL (+/- .01)1
- Holds Hummi Micro Draw device securely in place during sampling
Split Septum Micro T-Connector
Available in boxes of 100
Order Number: NMT8046
Micro T Split Septum T- Connector
- Designed and tested for use with the Hummi Micro Draw
- Tested to 150 insertions with the Hummi Micro Draw *
- Tested to 20 psi/1hr with Hummi Micro Draw in place*
- Tested to -10 psi vacuum with Hummi Micro Draw in place*
- DEHP and Latex free…low internal volume 0.25mL(+/- .01)
Correct Insertion Technique** of the Hummi Blunt Cannula into the Micro T Connector
Clean Septum Surface and Stabilize the T-Connector: Using a straight on approach to the split septum, gently probe the center area of septum for access. < 1 foot pound force needed to enter. Always access in the center of the septum. You will know you have entered the opening correctly when you feel a loss of resistance and the blunt cannula slides easily into the septum. Insert the Hummi blunt cannula straight in until it is fully inserted. Insertion should be smooth and easy in correct location. Stop insertion and reposition cannula in center of septum if you feel resistance.
Detailed information in full PDF download.